description du hardware de la soekris net4511:
je boot avec une kamikaze 7.09 histoire de voir
root@OpenWrt:/# lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] ELanSC520 Microcontroller 00:09.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (r) 00:10.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg NIC ) 00:12.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyr 00:13.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyr
version testée
| version | modification grub | modules | bios | commentaires |
| kamikaze 7.09 | les modules pour inserer une senao ne sont pas dispo | boot | ||
| kamikaze 8.09.1 | acouche d un écran blanc | |||
| kamikaze 8.09.2-rc3 | acouche d un écran blanc | |||
| trunk | il est nécaissaire de rajouter l'option hd=cyl,head,sect | boot | ||
7.09
le boot fonctionne une erreur avec le port pcmcia subsiste
une solution est expliquée là
http://pcmcia-cs.sourceforge.net/ftp/doc/PCMCIA-HOWTO-2.html
CardBus bridges can allocate memory windows outside of the 640KB-1MB ``memory hole'' in the ISA bus architecture. It is generally a good idea to configure CardBus bridges to use high memory windows, because these are unlikely to conflict with other devices. Also, CardBus cards may require large memory windows, which may be difficult or impossible to fit into low memory. Card Services will preferentially allocate windows in high memory for CardBus bridges, if both low and high memory windows are defined in config.opts. The default config.opts includes several candidate high memory windows, one of which will work in most cases.